SOLD OUT
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  1. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  2. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  3. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  4. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  5. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  6. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  7. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  8. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)
  9. GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)

GEPRC MARK4 LR8 5.8G 1.6W (ELRS 915)

Monthly payment from 14.32 € / 36 months

365.00 €

This FPV drone uses high-power image transmission to ensure signal stability and reliability,
it is equipped with EM2810 KV1280 motors, using 8-inch propellers with a maximum load of 2kg.

6mm arms can increase strength and overall stability and drone uses CADDX H1 camera, which is more suitable for fancy long-distance flights.

Out of stock

SKU: GP106128 Categories: , ,

Specification:

-868MHz Receiver
-Model: MARK4 LR8
-Frame: GEP-Mark4-8
-Wheelbase: 338mm
-Top plate thickness: 3mm
-Bottom plate thickness: 3mm
-Side panel thickness: 2.5mm
-Arm thickness: 6mm
-Plywood thickness: 2mm
-FC: GEP-F405-HD v2
-ESC: GEP-BLS60A-4IN1
-MCU: STM32F405RGT6
-Gyro: ICM-42688-P
-VTX: RAD VTX 5.8G 1.6W
-Camera: Caddx H1
-Motor: EM2810 1280KV
-Propeller: Gemfan 8040-3
-Payload: 1.2-2kg
-Weight: 529g

Includes:

-1 x Mark4 LR8
-4 x Gemfan 8040-3
-2 x Battery anti-slip pads
-1 x Screw pack
-1 x L-shaped screwdriver 1.5mm
-1 x L-shaped screwdriver 2.0mm
-1 x M5 wrench

Related products