Radiomaster TX16S ELRS, Mark II (Mode 2), v4.0

The best just got better! The latest in radio controller technology and the ultimate open-source radio. Now with version 4.0 gimbals and 4 precision bearings for an improved feel and perfect centering. A thorough redesign of the plastics has improved fit and finish and increased the durability.
The TX16S Mark II offers optimized power supply with reverse polarity protection and up to 2.2 amps of charging through the USB-C port. The 4.3″ IPS color display provides easy programming with touch panel precision. Also is added a DIY accessory socket for your bright ideas.

Standard version comes with V4.0 Hall Gimbals, same chipset as the AG01. Optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable.

ELRS LBT (Europe) Version is pre-installed with ExpressLRS CE EU domain LBT FW (Limited to 100mw power output)

Note: The controller requires an INR18650MH1 3200mAh – 6A battery, which is not included and must be purchased separately.

Description

Features:

-Improved internal circuitry and optimized power supply.
-New charge circuitry with integrated reverse-polarity protection.
-Optimized charge IC now allows up to 2.2A internal USB-C charge current.
-Rear-mounted audio jack provided headphone output.
-V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
-Optional high/low rear grips are included for improved ergonomics.
-Improved S1/S2 knobs with clear centre-detents.
-Improved LS/RS Sliders with smoother feel and better centre-detents.
-Redesigned battery cover for improved battery access.
-Retooled body shell with improved fit and finish.
-Trainer socket changed to standard TRS 3.5mm socket.
-Rear DIY Socket added for personalized mods.
-Improved internal plastics for better longevity.

Specification:

-Size: 287x129x184mm
-Weight: 750g (without battery)
-Transmission frequency: 2.400GHz-2.480GHz
-Transmitter module: Internal ELRS (SX1280)
-SD card: 256MB by default, 8GB maximum
-Antenna gain: 2db (transmit power adjustable)
-Working current: 400mA
-Working voltage: 6.6-8.4v DC
-Radio firmware: EdgeTX
-Module Firmware: ExpressLRS (ELRS)
-Channels: Up to 16 channels (depending on the receiver)
-Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
-Gimbal: Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor
-Module Bay: JR compatible module bay
-Upgrade method: Supports USB-C online / SD card offline upgrade